2018 KAWASAKI MULE PRO-FXR
Following multiple accolades for its MULE PRO series, Kawasaki has upped its game once again with the addition of the MULE PRO-FXR Side X Side to the 2018 lineup. The new MULE PRO-FXR features increased recreational abilities and premium styling that further establishes the full-size, compact Side X Side as the customer’s dependable work partner.
Developed alongside the PRO-FXT
and PRO-FX models, the new MULE
PRO-FXR Side X Side shares the same
engine and smooth acceleration, meaning
it’s still the fastest most powerful MULE
ever built, with independent suspension,
powerful disc brakes, effective engine
braking and Kawasaki’s acclaimed EPS,
speed-sensitive power steering. All of that is
packaged into a more compact design,
shorter than the other MULE PRO models, with improved ground clearance and turning radius.
Designed to appeal to someone who likes to play as a hard as they work, the styling of the MULE PRO-FXR Side x Side has a tough, truck like appearance with a painted hood and grill, low-profile LED inner and halogen outer headlights, front and rear bumpers as well as seating capacity for three in its contoured two-tone seats. While it has a recreational side, the MULE PRO-FXR is still built Kawasaki STRONG with steel cargo bed that has a 1453.6 kg (1000 lb) carrying capacity and the ability to tow up to 907.2 kg (2000 lb).
With this much capability, the MULE PRO-FXR is sure to impress your neighbors, even if the closest one is a half-mile away.
THE 2018 KAWASAKI MULE PRO-FXR
Premium styling with standard features including painted bodywork, contoured two-tone seats, cast aluminum wheels, rear bumper and finished rear wheel wells
812cc three-cylinder fuel injected engine that offers plenty of power with smooth acceleration
Nimble handling for trails with a tight 4.3 m (14.1 ft) turning radius
The MULE PRO-FXR is a part of Kawasaki’s expansive Side X Side family that continues to be Kawasaki STRONG. Built strong to play and work hard, while backed by a factory three-year limited warranty.
The MULE PRO-FXR Side X Side is built to be noticed. The front end has been refined and features a painted grill and hood designed to resist scratches and UV fading. New front and rear bumpers complete the tough truck inspired look. The compact vehicle size and smaller Roll Over Protective Structure (ROPS) gives the MULE PRO-FXR Side X Side a sportier look.
Inside the cabin, the plush bench seat is contoured to help maximize comfort and facilitate entry and exit. The stitched two-tone seat also features FXR badging, further increasing the style. Topping off the MULE PRO-FXR Side X Side is the new hard suntop built with lightweight composite conformed construction, designed to divert water to its outside edges. The new suntop is also approved for trailering.
SPACIOUS CABIN & EPS
With the tremendous durability and versatility of the MULE PRO-FXR Side X Side, all-day driving comfort is a high priority, allowing the driver and up to two passengers to get on with the job at hand. The cabin is particularly spacious, providing ample leg-and headroom, as well as a thick-cushioned contoured two-tone bench seat for up to three occupants.
Conventional three-point seatbelts and handholds are provided for each occupant and doors are standard to ease entry. For the driver’s convenience there is a tilt-adjustable thick grip steering wheel, which provides up to 40-degrees of adjustment to ensure a comfortable fit. It can also be tilted out of the way to facilitate access to the cabin.
The MULE PRO-FXR Side X Side takes full advantage of Kawasaki’s advanced speed-sensitive Electric Power Steering (EPS) system that considerably reduces steering effort, but ensures the steering has optimal feedback as speed increases, enhancing handling. The EPS helps to reduce steering kickback, reducing driver fatigue. Furthermore, it helps the driver enjoy a tight turning radius of just 4.3 m (14.1 ft)
ENGINE & TRANSMISSION
The strength of the Kawasaki MULE PRO-FXR Side X Side comes from its 812cc, three-cylinder engine with efficient digital fuel injection that has been tuned to deliver optimum performance throughout the rev range. With 48 lb-ft of torque, it has excellent pulling power when fully loaded, but also excellent acceleration and agility when combined with its four-wheel drive system. While the engine produces plenty of power, it runs quietly enough to hold a conversation in the cab.
Thanks to a high-output alternator, which delivers an incredible 60.8 amps at 2,000rpm (with the headlights on), occupants can power their accessories on all-day adventures and throughout the workweek with a pair of built-in, 12-volt outlets.
Transferring the engine’s performance to the ground is a specially tuned CVT transmission that delivers smooth acceleration, maximizing traction and contributing to precise maneuvering. The CVT also provides natural engine braking to help when descending slopes, with consistent engine hold-back to increase driver confidence, especially when the vehicle is loaded.
The CVT is combined with an electrically selectable 2WD/4WD system that has a dual-mode rear differential. Convenient dash-mounted switches allow the driver to instantly engage the systems, giving full control over the 4WD and locking rear differential.
Another element of the MULE PRO-FXR is the revised settings of its front and rear independent suspension. By soaking up the bumps it provides excellent comfort, and improves traction thanks to a generous 8.7 inches of suspension travel.
The suspension utilizes twin-tube, preload-adjustable shocks at each corner, with large diameter tubing for the A-arm design, ensuring Kawasaki’s legendary reputation for performance is maintained. Extra ground clearance of 264.2 mm (10.4 in.) also gives the driver confidence that the lower chassis will clear obstacles. The MULE PRO-FXR Side X Side has been designed to be more nimble with an overall length of 3093.72 mm (121.8 in.) and a compact 2057.4 mm (81 in.) wheelbase that provides a very tight 4.3m (14.1 ft) turning radius.
The suspension uses rubber bushings at the attachment points to enhance strength. The engine of the MULE PRO-FXR is rubber-mounted to reduce vibration and contribute to a high quality, comfortable ride.
Hydraulic disc brakes use 212mm rotors on all four corners and they combine with the dependable engine braking system to produce effective stopping power.
Dual-piston calipers in the front and single-piston calipers in the rear give the driver strong yet progressive stopping power. An easily accessible mechanical rear parking brake helps keep the MULE PRO-FXR Side X Side in place when stopped. A fuel injection control limits engine speed if the driver attempts to pull away with the parking brake engaged.
HAULING & TOWING
Because it is built Kawasaki STRONG, the MULE PRO-FXR Side X Side has a sturdy diamond-plate steel cargo floor with a maximum cargo capacity of up to 1000 pounds. The cargo bed measures 37.5 in.
x 53.3 in. x 11 in. and has integrated
steel cargo rails and internal ridges, allowing
loads to be secured using the abundance of available Kawasaki Genuine Accessories.
The storage options of the MULE PRO-FXR Side X Side means you can pack it for any adventure or get the job done, no matter what the day brings. The cargo bed has a gas- assisted tilt feature that makes it easier to raise the empty bed to allow easy access to the engine compartment.
The tailgate is secured by two sturdy levers, which make it easy to open and close.
The tailgate design also incorporates built-in cupholders, which come in handy when the tailgate is lowered. The cargo bed walls are designed with slots to accommodate cargo bed dividers, one of the many available Kawasaki Genuine Accessories. These allow cargo to be separated and stowed more securely.
The integrated 2” hitch receiver can enhance the versatility of the MULE PRO-FXR as it provides the ability to tow a substantial 907.2 kg (2000 lb) load (where permitted by provincial law) with the receiver, giving the new Kawasaki ultimate versatility.
DURABILITY – KAWASAKI STRONG
The MULE PRO-FXR Side X Side has a Shinari-tuned frame that balances rigidity and shock-absorbing elasticity. Shinari is a Japanese term for the elasticity that allows an object to bend without breaking and return to its original shape. A redesigned ROPS further increases the rigidity of the entire chassis.
The MULE PRO-FXR also has integrated inner wheel wells because Kawasaki wanted to keep mud and debris out of the engine compartment, protecting its vital components. The electrical equipment is also mounted high in the vehicle to keep it away from water, and the fuel tank is centrally mounted, away from the wheels to reduce the risk of damage from debris thrown up by the tires. Additionally, steel side guards help reduce the effects of side impacts.
Another thoughtful aspect is the single latch maintenance cover that provides quick and easy access to the oil dipstick, air filter and battery without lifting the cargo bed. The painted hood panel removes for easy access to ECU, fuse box and radiator.
The MULE PRO-FXR Side X Side features steel front and rear bumpers to provide both improved styling and a measure of protection as well as finished rear wheel wells that add style and durability to the vehicle.
Occupants will appreciate the storage space under the front seat. This allows users to securely store their equipment and gear in the standard 49.2 litres (13 gal.) storage bin with
a water resistant lid.
In addition, there is a handy glovebox as well as three dashboard pockets – with the center pocket large enough to accommodate the audio system, one of the many available Kawasaki Genuine Accessories – and two cupholders built into the bodywork in front of the dashboard.
The interior features multi-function LCD
instrumentation. It provides a large, intuitive, easy-to-read display that includes an array of information such as digital speedometer, odometer and hour meter, fuel gauge, dual trip meters, water temp, 2WD/4WD operation, clock and parking brake indicator to keep the driver informed at a glance. There is a light on the diff lock switch to indicate when it is selected. There are also two DC power outlets provided for convenient access to charge accessories and gadgets.
The same high-power alternator responsible for charging smartphones and devices will also contribute to lighting with the new small diameter headlights. The MULE PRO-FXR Side X Side combines two halogen headlights on the outside with high-intensity, auxiliary LED headlights. The lights are controlled with independent switches to adjust to different lighting conditions.
The new Kawasaki MULE PRO-FXR Side X Side can be fitted with a wide variety of Kawasaki Genuine Accessories to add a more personal touch to the vehicle while accentuating individual needs and style.
Owners wishing to accessorize the vehicle can take advantage of more than 60 Kawasaki Genuine Accessories including a new brush guard, roof mounted LED lightbar, audio system, flip-up windshield and a soft cab that integrates with the lower doors and ROPS to add to the appeal of the MULE PRO-FXR side by side. Owners can also add a winch package and skid plates. All of these Kawasaki Genuine Accessories were developed alongside the vehicle for installation, fit and finish.
MULE PRO-FXR owners can also choose from accessories such as a heater, bed extender, cargo divider, dual battery kit and so much more. The industry-leading Kawasaki STRONG Three-Year Limited Warranty remains intact after the purchase and installation of Kawasaki Genuine Accessories.
KAWASAKI STRONG THREE-YEAR LIMITED WARRANTY
Completing the appeal of the MULE PRO-FXR is a standard Kawasaki STRONG Three-Year Limited Warranty to keep you running STRONG.
KAWASAKI MULE PRO-FXR
Colors: Atomic Silver, Candy Persimmon Red
Availability: September 2017
To download high-resolution images, please visit http://media.kawasaki.ca
More Like This
UPCOMING DIRTTRAX AIRTIMES
LATEST VIDEOS View All
Dirt Trax Television 2018 - Episode 3 Sneak Peek
July 16, 2018
Discussion on some exciting 2018 side-x-side models including the Polaris RZR XP Turbo S, ...
Can-Am Mud Build: Budget Breakdown
July 20, 2018
AJ is here to give you the full budget breakdown of our Can-Am Mud Build piece by piece dating ...
In-Depth Look: 2019 Yamaha Wolverine X2
July 19, 2018
We get our early hands-on impressions in on the recently announced, sporty and versatile 2019 ...
First Impressions: 2019 Suzuki KingQuad 750
July 18, 2018
We received an invite to visit our friends at Suzuki to test out the return of their most ...
Full REVIEW: 2018 Textron Off Road Havoc X
July 17, 2018
Luke hits the trail in Textron Off Road’s ‘all of the above’ recreational utility vehicle: ...
Top Gear View All
July 16, 2018
LS2 MX470 SUBVERTER HELMET
LS2, Spanish manufacture of high quality helmets is also a brand delivering big bang for your buck with the introduction of the MX470 ...
Ask Motorhead View All
April 18, 2017
WILDCAT TRAIL VS. WILDCAT SPORT
Would you be happier with a Wildcat Trail or would you go for a Wildcat Sport if you had your choice?
Headlines View All
June 28, 2018
Warn Industries Launches Two All-New Ground-Breaking Powersports Winch Lineups
New winches offer never-before-seen technology and new levels of performance
Tourism View All
November 17, 2017
WIN AN OFF-ROAD FAMILY ADVENTURE GETAWAY
Win an Off-Road Family Adventure Getaway at Spearhead Trails in beautiful Southwest Virginia.